VPX3-687
VPX3-687
The VPX3-687 is a versatile, high-performance Ethernet switch designed to connect the next generation of 3U systems. The VPX3-687 provides switching throughput of up to 320 Gbps.
Advantages
Some advantages of VPX3-687
01
Features
- Up to 32 x 10 GbE interfaces in a single VPX 3U slot
- Line-rate forwarding up to 320 Gbps
- Support for Gigabit, 10 Gbps and 40 Gbps backplane Ethernet standards
- Configurable for multiple OpenVPX switch module profiles, including 2F24U, 8F, 6F6U
- Fully-managed multi-layer switching services including multicast, QoS, and security features
- IEEE 1588 PTP transparent clock for high-precision system-level time synchronization
02
Application
- High-density, standards-based connectivity for HPEC and sensor and processing systems
- Low-latency 10 Gbps control plane switch
- High-throughput 40 Gbps data plane fabric
03
Physical Specifications
- Mechanical and environmental :
- VITA 46 / 48 3U VPX
- Available in Curtiss-Wright L0 and L200 ruggedization levels
- Ethernet interfaces :
- 32 SerDes interfaces to VPX backplane configurable for 1G, 10G, 40G modes
- SFP+ on front panel (air-cooled models only)
- 320 Gbps line-rate forwarding
- Jumbo frames up to 9 Kbytes
- Interface standards :
- 1000BASE-KX, 1000BASE-BX
- 10GBASE-KR
- 10GBASE-KX4
- 40GBASE-KR4
- 802.3u MII
- Layer 2 Switching features :
- 4096 VLANs per IEEE 802.1q
- Spanning Tree Protocol per 802.1d, 802.1s, 802.1w
- 802.3ad LACP
PDN 20-10
Parvus
DuraNet 20-10
Parvus® DuraNET 20-10® is a Commercial Off the Shelf (COTS) Gigabit Ethernet switch subsystem optimized for size, weight, power and cost sensitive military and civilian computer network system applications.
Advantages
Some advantages of Parvus DuraNet 20-11
01
Features
- Rugged 8-port Gigabit Ethernet switch
- LHigh performance, rugged MIL-circular connectors
- Layer 2+ carrier Ethernet software management
-
Ultra-miniature SWaP optimized design :
- Size : 10 in3 (fits in hand)
- Weight : 0.50 lb (~0.23 kg)
- Power : 5W
- PTP (IEEE-1588v2) precision time stamping
- Fully validated to MIL-STD-810G/461F/704F/1275D and DO-160
02
Application
- Embedded Gigabit Ethernet edge networking applications
- SWaP-constrained platforms
- Network-centric operations and situational awareness
- In-vehicle/aircraft LAN switching, static IP routing
- Fixed and rotary wing (un)manned air vehicles
- C4ISR technology refresh and LRU upgrades
03
Physical Specifications
- Dimensions (H x D x W) (estimated, excl connectors) :
- 1.20” x 2.49” x 3.34” (3.05 x 6.32 x 8.48cm)
- Weight : approx. 0.5 lb (~0.23 kg)
- Interface standards :
- 1000BASE-KX, 1000BASE-BX
- 10GBASE-KR
- 10GBASE-KX4
- 40GBASE-KR4
- 802.3u MII
- Installation: four (4) mounting holes on bottom for 6 to 32 hardware, can also be used with custom mounting brackets
-
Connectors :
- J0 : Omnetics Metal Nano Circular (MNC) for power input (Note : Early Access Units (EAUs) bring out power on J1)
- J1/J2 : Amphenol 2M series micro-miniature MIL-DTL-38999-like connectors with environmental sealing for Ethernet, serial ports (50%+ smaller/lighter than traditional 38999s)
- Cooling: passive natural convection without forced air or fans and no moving parts
- Enclosure and finish: corrosion resistant, aluminium alloy with black anodize finish per MIL-A-8625
PDN 20-11
Parvus
DuraNet 20-11
Parvus® DuraNET® 20-11 is a rugged ultra-small form factor (SFF) 8-port Commercial Off the Shelf (COTS) Gigabit Ethernet (GbE) Switch optimized for size, weight and power (SWaP).
Advantages
Some advantages of Parvus DuraNet 20-11
01
Features
- Rugged 8-port Gigabit Ethernet switch
- High performance, rugged MIL-circular connectors
- Layer 2+ carrier Ethernet software management
- Ultra-miniature SWaP optimized design: :
- Size : 10 in3 (fits in hand)
- Weight : 0.50 lb (~0.23 kg)
- Power : 5W
- PTP (IEEE-1588v2) precision time stamping
- Fully validated to MIL-STD-810G/461F/704F/1275D and DO-160
02
Application
- Embedded Gigabit Ethernet edge networking applications
- SWaP-constrained platforms
- Network-centric operations and situational awareness
- In-vehicle/aircraft LAN switching, static IP routing
- Fixed and rotary wing (un)manned air vehicles
- C4ISR technology refresh and LRU upgrades
03
Physical Specifications
- Dimensions (H x D x W) (estimated, excl connectors) :
- 1.20” x 2.49” x 3.34” (3.05 x 6.32 x 8.48cm)
- Weight : approx. 0.5 lb (~0.23 kg)
- Installation : four (4) mounting holes on bottom for 6 to 32 hardware, can also be used with custom mounting brackets
- Connectors :
- J0 : Omnetics Metal Nano Circular (MNC) for power input (Note: Early Access Units (EAUs) bring out power on J1)
- J1/J2 : Amphenol 2M series micro-miniature MIL-DTL-38999-like connectors with environmental sealing for Ethernet, serial ports (50%+ smaller/lighter than traditional 38999s)
- Cooling : passive natural convection without forced air or fans and no moving parts
- Enclosure and finish : corrosion resistant, aluminium alloy with black anodize finish per MIL-A-8625
PDN 3300
Parvus
DuraNet 3300
Parvus® DuraNET® 3300 is a Cisco IOS®-26-port MIL-managed L2/L3 embedded Ethernet switch. Integrated Cisco ESS-3300 System switch module in a robust system design
Advantages
Some advantages of Parvus DuraNet 3300
01
Features
- 26-port L2/L3 switch (24x 1000Base-T + 2x 10GBase-SR optical ports)
- Cisco ESS-3300 rugged embedded switch cards with IOS-XE management
- Power Over Ethernet (PoE) injection
-
Rugged SWaP-optimized design :
- Size : < 150 in3 volume; < 3U tall
- Weight : ~ 6.0 lb (2.72 kg)
- Power : < 50 W (est), excluding PoE
- Comprehensive Layer 2/3 switching, QoS, IP multicast, security and management
- Rugged IP67 chassis with MIL-performance circular connectors
- 28 VDC filtered MIL-STD-1275/704/DO-160 power supply for “dirty power” of aircraft / ground vehicles
- MIL-STD-810G/DO-160 thermal, shock, vibration, altitude, humidity; also MIL-STD-461F/DO-160G EMI/EMC
02
Application
- In-vehicle / airborne rugged Ethernet switching and routing
- High-throughput, secure Ethernet traffic over fiber optics
- Small form factor (SFF) embedded networking LRU upgrade
- C4ISR technology refresh
03
Physical Specifications
- Weight : estimated at 6.0 lb (2.72 kg)
- Dimensions (D x W x H), excluding connectors and mounting feet (subject to change)
- Estimated at 6.75 x 6.25 x 3.50” (17.15 x 15.88 x 8.89 cm)
- Chassis : aluminum alloy, corrosion resistant
- Ingress protection : dust and water proof (similar to IP67)
- Finish: black anodize finish per MIL-A-8625, Type II, Class 2
- Rugged circular connectors:
- 801 Series Mighty Mouse / 2M Series : 1GBaseT, console, zeroize
- MIL-PRF-64266 NGCON : 10GBaseSR
- M12 : Power Input
- Installation : base flange mount (4 x holes) or side mount (90° rotated orientation, 2 x holes)
